Laptop and Desktop Motherboard Repairing

ALL TYPES OF LAPTOP AND DESKTOP MOTHERBOARD REPAIRING CHIP LEVEL LIKE
INTEL,GIGABYTE,MERCURY,ASROCK,ASUS,MSI,
CHINA ,CYRIX,VINCOMP,JETWAY,MAGICPRO,
BIOSTARACER,IBM,HP,COMPAQ,TOSHIBA,SONY,
GATEWAY, ETC.

REPLACE PARTS DETAIL:

I/O CONTROLLER IC(WINBOND,ITE,SMSC,SMART I/O , ETC.)

CLOCK IC (ICS,WINBOND,ETC.)

MOSFET(APM2045,3055,ETC)

BIOS (WINBOND,SST,ST,PMC,INTEL, ETC.)

SERIAL PORT BUFFER IC

VOLTAGE REGULATOR MODULE IC (ADP,RTL,WINBOND)

VOLTAGE REGULATOR MODULE MOSFET (70N03,N02,K3849 ETC.)

SOCKET (IDE,SMPS.CORE VOLTAGE,FAN,CMOS CELL ETC.)

SOUND IC (ALC,CRYSTAL ETC.)

CONNECTORS (USB,VGA,PS2,NORMAL KEYBOARD,SOUND,LPT,SERIALPORT,)

BIOS PROGRAMMING WITH USB BIOS PROGRAMMER

32Khz + 14Mhz CRYSTAL

SMD TRANSISTOR,REGISTANCE ,PF ETC.

CAPASITORS (1000,1200,1500,3300 MFD 6.3V)

FILTER COIL

LAN IC (REALTEK,INTEL ETC.)

CCFL BULB , CCFL CONTROLLER ,LCD ETC.

CONTACT FOR BEST REPAIRING RATE
Aries Computer Solutions
Ph no:(02692)268356 Mob: 09998042319
WEB SITE:- http://arieslaptop.hpage.com/

Faster DOS Printing

If you are experiencing slow printing for DOS programs with Windows2000
Go Start Run Regedit Click Hkey_Local_Machine Click on System Click CurrentControlSet Click Control Go to the bottom of this part of the list and click WOW Click LPT timeout and change it to a 3

Decreasing Boot Time

Microsoft has made available a program to analyze and decrease the time it takes to boot to WindowsXP
The program is download from http://www.onecomputerguy.com/software/bootvis.exe
Uncompress the file.
Run BOOTVIS.EXE
For a starting point, run Trace / Next Boot + Driver Delays
This will reboot your computer and provide a benchmark
After the reboot, BootVis will take a minute or two to show graphs of your system startup.
Note how much time it takes for your system to load (click on the red vertical line)
Then run Trace / Optimize System
Re-Run the Next Boot + Drive Delays
Note how much the time has decreased
Mine went from approximately 39 to 30 seconds.

WindowsXP Command Line Utilities

While there are a lot of command line utilities in WindowsXP, here are some that I have been using lately.

bootcfg - Configures, queries, or changes Boot.ini file settings.

driverquery - Displays a list of all installed device drivers and their properties.

getmac - Returns the media access control (MAC) address and list of network protocols associated with each address for all network cards in each computer

gpresult - Displays Group Policy settings and Resultant Set of Policy (RSOP) for a user or a computer

netsh - You can use commands in the Netsh Interface IP context to configure the TCP/IP protocol

schtasks - Schedules commands and programs to run periodically or at a specific time

systeminfo - Displays detailed configuration information about a computer and its operating system




.

Remembering Outlook / Outlook Express Password

On systems, Outlook or Outlook Express will not remember the e-mail password,
which would then need to be entered in each time.

To solve the problem:
Open Registry Editor
Go to HKEY_CURRENT_USER \ Software \ Microsoft
Right Click Protected Storage System Provider
Choose the Permissions option
Click the Advanced box near the bottom right hand corner. This should open another box, Towards the bottom of this box there should be two tick boxes, make sure that both of them are ticked. Click Apply, another box will open Click Yes, then Click OK and OK again.
Left Click the + next to Protected Storage System Provider and Delete any sub folder in this tree. (Right clicking and choose the delete option or press the delete key and choosing yes to delete)
Shutdown and Restart Computer.

Renaming the Start Button

To rename the start button, you will need a hex editor.
My preference is UltraEdit
Copy the \windows\explore.exe file to a new name (e.g. explorer_1.exe)
With the hex editor, open that file and go to offset 412b6
You will see the word start with blanks between each letter
Edit it be any 5 characters or less
Save the file
Boot to DOS
Copy the existing c:\windows\explorer.exe to explorer.org
Copy explorer_1.exe to explorer.exe
You will also need to replace the explorer.exe in the c:\windows\system32\dllcache file as well with the new one.

Note: If the partition is NTFS and you can't access the files from DOS:
Start Regedit
Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon.
Change the value of Shell from Explorer.exe to explorer_1.exe

Logging in as Administrator

If you want to log in as Administrator, but it is not show on the Welcome screen,
Hold the Ctrl-Alt key and press Del twice.
This will bring up the normal login and you can log on as Administrator

To unhide the Administrator account so it does show up:
Start Regedit
Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon \ SpecialAccounts \ UserList
Unhide the Administrator key by giving it a value of 1

Disabling Error Reporting

By default, WindowsXP will request to report application errors to Microsoft.
To turn this off:
Right click on the My Computer icon on the desktop
Select Properties / Advanced
Click on the Error Reporting tab
Check Disable error reporting

Creating a Password Recovery Disk

In case you forget your password, you can create a password recovery floppy disk beforehand to help you out of this problem.
Single-click Start menu
Go to the Control Panel / User Accounts
Click the User Account
On the left hand side, click on Prevent forgotten password
You will need to know your password to create the disk.
If you don't remember your password sometime in the future, click on the green arrow like normal at the login and you will be prompted to insert the password recover disk

Creating a Boot Floppy

To create a bootable floppy from within WindowsXP:
Insert a floppy into the A: drive
Open the Explorer
Right click on the A: Drive
Select Format
Check Create an MS-DOS startup disk
Click on the Start button
This will create a Millennium boot disk

Allowing Network Access with Blank Passwords

 
Although you can log in locally without a password, by default, WindowsXP Pro does not allow network users to access the computer without a password. Typically you will receive an Unknown error 31 if this is the case.

To change this setting:
Run gpedit.msc
Go to Computer Configuration / Windows Settings / Security Settings / Local Policies / Security Options
Double click on Accounts: Limit local account use of blank passwords to console login only
Disable this option

Changing Drive Letters

If you want to change the letters assigned to your fixed or removable drives:
Right Click on My Computer
Select Manage
Select Disk Management

For a Fixed Disk:
Select it
Right click
Select Change Drive Letter and Path
Click on the Edit button
Enter in the letter you want to use

For a Removable Disk:
In the lower, right hand panel, right click on the Disk or CD ROM #
Select Change Drive Letter and Path
Click on the Edit button
Enter in the letter you want to use

Note: This can only be done for drives that do not have the Operating System Installed or you are booting to.

Change DOS color

SYNTAX Sets the default console foreground and background colors.COLOR [attr]
attr Specifies color attribute of console output
Color attributes are specified by TWO hex digits -- the first corresponds to the background; the second the foreground. Each digit can be any of the below values.0 = Black8 = Gray1 = Blue9 = Light Blue2 = GreenA = Light Green3 = AquaB = Light Aqua4 = RedC = Light Red5 = PurpleD = Light Purple6 = YellowE = Light Yellow7 = WhiteF = Bright WhiteIf no argument is given, this command restores the color to what it was when CMD.EXE started. This value either comes from the current console window, the /T command line switch or from the DefaultColor registry value. The COLOR command sets ERRORLEVEL to 1 if an attempt is made to execute the COLOR command with a foreground and background color that are the same.
EXAMPLEColor 2A = Creates a green background with light bright green text, similar to many of the FTP, telnet, and old BBS console screens.Valid for a session only

Lock any folder using DOS

Friends Hide your folders with out using any softjust go to
run.....>
cmd....>
note 1 "_" give 1 space on that place
note 2 ex:- if your folder is at D drive then
-->first you D: and press enter after you write below command
-->Attrib "your folder name"_+r_+a_+s_+h
-->enter
-->if you want to view that folder then
you write same command use with -
like -->attrib "your folder name"_–r_–a_–s_–h
For example:
->first you D: and press enter after you write below command
-->Attrib "Wehackers"_+r_+a_+s_+h
-->enter
-->if you want to view that folder then
you write same command use with -
like -->attrib "Wehackers"_–r_–a_–s_–h
Note:replace "_" by space

DOS tips To copy and paste MS-DOS text using the mouse

>Open the Command Prompt window.
>Right-click the title bar of the command prompt window, and then click Properties.
>On the Options tab, under Edit Options, select the QuickEdit Mode check box if it isn't already selected, and then click OK.
>In the Apply Properties To Shortcut dialog box, click either of the following:
>Apply properties to current window only to use QuickEdit mode in the current window. >Modify shortcut that started this window to apply QuickEdit mode every time you start the MS-DOS-based program.
>Click OK. >Click and drag the mouse pointer over the text you want to copy in the command prompt window.
>Position the cursor where you want the text to be inserted, and then do either of the following:
>In an MS-DOS-based program, right-click the title bar, click Edit, and then click Paste. >In a Windows-based program, click the Edit menu, and then click Paste.
Notes
>QuickEdit mode is not available in all MS-DOS-based programs.
>You cannot paste text into a command prompt window or MS-DOS-based program when it is running in a full screen.
Select a TrueType font to use in the command prompt
Some languages require you to use a TrueType font when you type characters at the command prompt. To select a TrueType font, follow these steps:
>Open Command Prompt, if you have not already done so.
>On the System menu, click Properties.
>On the Font tab, under Font, click a TrueType font, such as Lucida Console, and then click OK.
>In the Apply Properties To Shortcut dialog box, do one of the following:
>To use the TrueType font for only this session, click Apply properties to current window only.
>To always use the TrueType font you selected, click Modify shortcut that started this window.
Note
To open a command prompt, click Start, point to All Programs, point to Accessories, and then click Command Prompt. or Start-> Run-> CMD

Complete list of Win XP/XP cmd

ADDUSERS Add or list users to/from a CSV fileARP Address Resolution ProtocolASSOC Change file extension associationsASSOCIAT One step file associationAT Schedule a command to run at a later timeATTRIB Change file attributes
BOOTCFG Edit Windows boot settingsBROWSTAT Get domain, browser and PDC info
CACLS Change file permissionsCALL Call one batch program from anotherCD Change Directory - move to a specific FolderCHANGE Change Terminal Server Session propertiesCHKDSK Check Disk - check and repair disk problemsCHKNTFS Check the NTFS file systemCHOICE Accept keyboard input to a batch fileCIPHER Encrypt or Decrypt files/foldersCleanMgr Automated cleanup of Temp files, recycle binCLEARMEM Clear memory leaksCLIP Copy STDIN to the Windows clipboard.CLS Clear the screenCLUSTER Windows ClusteringCMD Start a new CMD shellCOLOR Change colors of the CMD windowCOMP Compare the contents of two files or sets of filesCOMPACT Compress files or folders on an NTFS partitionCOMPRESS Compress individual files on an NTFS partitionCON2PRT Connect or disconnect a PrinterCONVERT Convert a FAT drive to NTFS.COPY Copy one or more files to another locationCSVDE Import or Export Active Directory data

List of F1-F9 Key Cmds 4 cmd prompt List of F1-F9 Key Commands for the Command

PromptF1 / right arrow: Repeats the letters of the last command line, one by one.F2: Displays a dialog asking user to "enter the char to copy up to" of the last command lineF3: Repeats the last command lineF4: Displays a dialog asking user to "enter the char to delete up to" of the last command lineF5: Goes back one command lineF6: Enters the traditional CTRL+Z (^z)F7: Displays a menu with the command line historyF8: Cycles back through previous command lines (beginning with most recent)F9: Displays a dialog asking user to enter a command number, where 0 is for first command line entered.Alt+Enter: toggle full Screen mode.up/down: scroll thru/repeat previous entriesEsc: delete lineNote: The buffer allows a maximum of 50 command lines. After this number is reached, the first line will be replaced in sequence.Helpful accessibility keyboard shortcutsSwitch FilterKeys on and off. Right SHIFT for eight secondsSwitch High Contrast on and off. Left ALT +left SHIFT +PRINT SCREENSwitch MouseKeys on and off. Left ALT +left SHIFT +NUM LOCKSwitch StickyKeys on and off. SHIFT five timesSwitch ToggleKeys on and off. NUM LOCK for five seconds

Hack XP user password using DOS

Hack....................................Boot anyone's xp computer who has a limited account active (i.e. guest) When you boot, boot to safe mode w/ dos prompt. (push F8 during startup) Type

C:\cd windows\system32
(for a nice matrix touch, I would also type this)
color 0a
While still in system32 type:
command userpasswords2
Then unselect the box that says "this computer requires a password etc."Reboot!
Congrats- You just hacked XP

How To Make A Shutdown Timer

METHOD # 1
Right click on your desktop and choose "New=>shortcuts".In the box that says "Type the location of the shortcut",type in "shutdown -s -t 3600" without the quotation marks and click next. Note: 3600 are the amount of seconds before your computer shuts down. So , 60secs*60mins=3600secs.
Make up a name for the shortcut and you're done.You can change the icon by right clicking=>properities=>change icon=>browse
TO ABORT:To make an abort key to stop the shutdown timer just create another shortcut and makethe "location of the shortcut" to " shutdown -a" without the quotes.
METHOD # 2
{EASIER THAN THE PREVIOUS ONE}Here is another trick to shutdown at a specific time, for example you wish to shutdown at 11:35am. Type this instart=>RunType Code: at 11:35 shutdown -sTO ABORT:Code: shutdown -a

How to speed up your slow internet connection?

Today a special tip for those who are still using any slow dial-up internet connection due to unavailability of any broadband connection in their area. The Web Accelerator application designed to provide the full acceleration for your routine web sites browsing. With the help of Web Accelerator you can browse your internet 4 to 6 times faster than normal dial-up connection. Basically this services compressing the website text data, images and heavy graphics to open or download this data with high speed.
This technique is more useful for static websites and for email applications but don't accelerate with secure and downloading audio or video files. Some good web accelerator retains your system cache to reuse websites with faster speed and can also block windows pop-up. If you are using FTP sites and downloading any program using dial-up, then web accelerator is not for you. There are various web accelerator software are free available on internet, visit and download it to enjoy your connection.
download from http://www.majorgeeks.com/

Internet Error Codes and Meaning

Sometime you are browsing the internet and trying to open any website, your e-mail and any FTP sites , but you see different error codes there. You should be familiar with these error codes. You can solve these problems if you are well-known with the meaning of error codes.
Error Codes Meaning
400 This is bad request error, First check you may be typing wrong URL name and server could not understand your request.
401 You are trying to open any unauthorized access site or page. Check your username and password if you are trying to open any webpage.
402 Payment Required Error
403 You are trying to open any forbidden page and you are blocked by that domain.
404 Here you are trying to open the webpage that was removed or re-named, also check the URL spelling.
408 This is time out error. you should send the request with in time that the server set for you.

Make Your XP Genuine !

To make your Windows XP genuine so that you can avail the updates from microsoft , Do the Following :

1. Start > Run > "regedit" (without the quotes of course)

2. Go To The Key:

HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\Windows NT\CurrentVersion\WPAEvents\OOBETimer

...and doubleclick on it and edit the replace first 2 digits with 67.

3. Start > Run > "%systemroot%\system32\oobe\msoobe.exe /a" (again, dont type the quotes)

4. The activation screen will come up, click on register over telephone, then click on CHANGE PRODUCT KEY, enter in this key: JG28K-H9Q7X-BH6W4-3PDCQ-6XBFJ.

5. No need to Enter confirmation code, now just click remind me later and ITS DONE !

Modify Windows Your Style

1.Automatic Screen Refresh
When you make changes to your hard drive and use Explorer, the changes are not usually displayed until you press the F5 keyTo make the updates automatic:
1.Start Regedit
2.Go to HKEY_LOCAL_MACHINE / System / CurrentControlSet / Control / UpdateMode
3.Edit the DWORD value to be between 1 and 7

2.Changing the Title on Windows Media Player
You can change the title bar for the Windows Media Player
1.Start Regedit
2.Go to HKEY_USERS \ .DEFAULT \ Software \ Policies \ Microsoft \ WindowsMediaPlayer
3.Create a string value of TitleBar
4.Give it a value of whatever you want to appear in the title bar

3.Control Panel Restrictions
There are many general restrictions you can make to the Control Panel
1.Start Regedit
2.Go to HKEY_Current_User / Software / Microsoft / Windows / CurrentVersion / Policies
3.Create a new keys under Policies called System
4.You can then add DWORD values set to 1 in the appropriate keys
5.To re-enable them, either delete the key or set the value to 0
NoDispCPL - Disable Display Control Panel
NoDispBackgroundPage - Hide Background Page
NoDispScrSavPage - Hide Screen Saver Page
NoDispAppearancePage - Hide Appearance Page
NoDispSettingsPage - Hide Settings Page
NoSecCPL - Disable Password Control Panel
NoPwdPage - Hide Password Change Page
NoAdminPage - Hide Remote Administration Page
NoProfilePage - Hide User Profiles Page
NoDevMgrPage - Hide Device Manager Page
NoConfigPage - Hide Hardware Profiles Page
NoFileSysPage - Hide File System Button
NoVirtMemPage - Hide Virtual Memory Button

4.Disabling My Computer
In areas where you are trying to restrict what users can do on the computer, it might be beneficial to disable the ability to click on My Computer and have access to the drives, control panel etc.To disable this:
1.Start Regedit
2.Search for 20D04FE0-3AEA-1069-A2D8-08002B30309D
3.This should bring you to the HKey_Classes_Root \ CLSID section
4.Delete the entire section.
Now when you click on My Computer, nothing will happen.You might want to export this section to a registry file before deleting it just in case you want to enable it again..
See the section on Installation to see how to do this automatically during an install.

5.Disabling the F3 Search Key
If you want to disable the ability to use the F3 key from either the Windows Explorer or Internet Explorer
1.Start Regedit
2.Go to HKEY_CURRENT_USER\Software\Policies\Microsoft\Internet Explorer\Restrictions
3.Create a Dword value called NoFindFiles
4.Give it a value of 1
5.Reboot

6.Disabling the Right-Click on the Start Button
Normally, when you right button click on the Start button, it allows you to open your programs folder, the Explorer and run Find.In situations where you don't want to allow users to be able to do this in order to secure your computer.
1.Start Regedit
2.Search for Desktop
3.This should bring you to HKey_Classes_Root \ Directory
4.Expand this section
5.Under Shell is Find
6.Delete Find
7.Move down a little in the Registry to Folder
8.Expand this section and remove Explore and Open
Now when you right click on the Start button, nothing should happen.You can delete only those items that you need.Note: - On Microsoft keyboards, this also disables the Window-E (for Explorer) and Window-F (for Find) keys.See the section on Installation to see how to do this automatically during an install.

7.Eliminating the Right Click on the Taskbar
To eliminate the right click on the taskbar:
Start Regedit
1.Start Regedit
2.Go to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer
3.Add a DWORD and give it a name of NoTrayContextMenu
4.Give it a value of 1
5.Reboot

8.Hiding All Icons from the Desktop
1.Start Regedit
2.Go to HKey_Current_User \ Software\ Microsoft \Windows \ Current Version \ Policies \ Explorer
3.Right click on the right panel and add a New / DWORD
4.Name it NoDesktop
5.Give it a value of 1
6.Logoff or Reboot the computer
Now all icons are hidden on the desktop

9.Setting the Recycle Bin to Always Delete
You can set the recycle bin to always delete items (like holding down the shift key when dragging files to the recycle bin)
1.Start Regedit
2.Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ BitBucket
3.Set the key NukeOnDelete to 1

10.To speed up the Start Menu
1.Start the REGEDIT program
2.Search for the word desktop
3.This should be in HKEY_CLASSES_ROOT / CLSID / {00021400...
4.Right Click on the right panel
5.Pick NEW / String Value.
6.Name it MenuShowDelay, all one word.
7.Select a value from 1-10, 1 being the fastest.
8.Exit REGEDIT
9.Restart Windows

Alphabetizing your Start Menu

 If you're like me you've probably installed lots of programs, so many in fact that if you go to try and find a program its actually becoming really hard because they're not alphabetized, new programs are stuck on the end, so forth and so on, well, this is a really quick, reallllly easy tip to organize your start menu in Windows XP (I think this also works in Win 98, but I'm upgrading my comp that has Win 98 and can't verify it). Here are the steps:
1.First click on the start button
2.Move your mouse to "All Programs"
3.Move your mouse to any of the folders there
4.Right Click
A box will open up, scroll to "Sort By Names" and click

Hibernate Your XP !

 



Hey your Windows XP has a very good but hidden feature !

Trick Advantage :
You can leave your work in between and shutdown the PC and resume it next time as it is !
Even I switched off my PC while writing this article and when I reopened it I resumed my article from where i left !

When you want to stop your work and shutdown(Keeping your programs open)
Do The Following :
1. Click start>Turn Off Computer
2. As the Turn Off menu comes up press 'Shift' and 'Stand By' changes to 'Hibernate'
3. Click Hibernate (Shift Kept Pressed)

Your xp will save the work and shutdown !

Now, when you switch it on again it will resume it again !

No loading of windows will take place and you will be resumed to your work as if you had just switched your monitor off and now on again !

Change Search and Run icons in Start Menu

It was impossible to get an Icon Package / Theme that would change ALL the icons in the Start Manu. The Typical Problem would arise with the Search and Run icons (I have disabled the rest...)

A small search in the registry and I managed to identify the "keys" that control the default icons.To change them you need to get in the registry, and that can be done by going to Start > Run (or WinKey+R) and typing "regedit" (yes, without the quotes...)
"Search"
HKEY_CLASSES_ROOT\CLSID\{2559a1f0-21d7-11d4-bdaf-00c04f60b9f0}\DefaultIcon
"Run"
HKEY_CLASSES_ROOT\CLSID\{2559a1f3-21d7-11d4-bdaf-00c04f60b9f0}\DefaultIconYou can edit each one by double clicking on the respective file.

Hope you enjoy!...

Customize Desktop Icons

IE, My Computer, My Documents, My Network Places!


Right click an empty area of the desktop and choose properties. Select the "Desktop" tab and click "Customize Desktop".
On the General Tab place a checkmark in the icons you wish to appear on the Desktop.

Hide Users on the Welcome Screen

When you add an account for certain users with Windows XP, their user names will appear on the Welcome Screen. Sometimes a user needs to be added to a Windows XP machine, because he needs access (via the network) to resources on the machine, but he will not be physically logging in on the computer. You can remove his name from the Welcome Screen, while still maintaining the user account.

Start the Registry Editor
Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon \ SpecialAccounts \ UserList \ Right-click an empty space in the right pane and select New > DWORD
Value Name the new value exactly as the Username Leave the Value data as 0

If you want to enable this user again on the Welcome Screen, either double-click the Username value, and change the Value data to 1, or delete the Username Close the registry editor

Make Your Cd Autorun

If you wanna make a autorun file for that CD you are ready to burn just read this...

1) You open notepad

2) now you writ: [autorun]
OPEN=INSTALL\Setup_filename.EXE
ICON=INSTALL\Setup_filename.EXE

Now save it but not as a .txt file but as a .inf file.

But remember! The "Setup_filename.EXE" MUST be replaced with the name of the setup file. And you also need to rember that it is not all of the setup files there are called '.exe but some are called '.msi

3) Now burn your CD with the autorun .inf file included.

4) Now set the CD in you CD drive and wait for the autorun to begin or if nothing happens just double-click on the CD drive in "This Computer"

You Can't Do It !

You can not make any folder named any of the following :

CON, PRN, AUX, CLOCK$, NUL, COM1, COM2, COM3, COM4, COM5, COM6, COM7, COM8, COM9, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, LPT9

Use Notepad As A Diary !

Ever wanted to maintain a diary on your PC ?
Now, you can do it without the use of a software !

USE NOTEPAD !

Do The Following :
1. Open Notepad
2. Type : .LOG
3. Save it with any name say 'Diary'
4. Open Diary.txt again

Wow you see today's date and time, so start writing your Diary !

Wow Notepad Knew About 9/11/2001 !


Amazing thing but true , Notepad knew about 9/11/2001 !
The flight number which hit the WTC in New York was Q33N !

See it yourself :
1. Open Notepad
2. Type : Q33N
3. Now, go to Format menu
4. Choose Font
5. Now, change the size to '72'
6. Now, change the font to 'Wingdings'
7. See what is displayed !

Isn't it amazing !

Surf The Blocked Websites !

Are you frustrated because you are not able to visit your favorite websites in your school or college ?
Well, no problem the remedy comes here !

Below are the list of various sites from which you can surf the blocked websites !

http://kproxy.com (Best For Orkut !)
http://backfox.com
http://atunnel.com
http://calculatepie.com
http://www.stupidcensorship.com
http://www.vmathpie.com
http://www.xroxee.com
http://mathtunnel.com

Another Way,
Today we still use Internet Explorer to surf the net, so if the block is done on the system then using Mozilla Firefox can help !
Use Firefox and try visiting the blocked sites !


Enjoy...

Block Or Unblock Websites without software !

Many times in schools, colleges & offices surfing some sites like orkut,etc are banned !
To overcome this you can unblock these or block some other websites and play pranks !

Do The Following :
For eg you want to block www.xyz.com !

* Open the folder C:\WINDOWS\system32\drivers\etc
* There you will find a file named HOSTS
* Click on the file and press SHIFT and now right click on it .
* From the right click menu select Open with .
* Now, select Notepad to open the file from the list !
* Now, in the file under the line 127.0.0.1 localhost add another line as 127.0.0.2 www.xyz.com.
* Now, File>>Save !

Now, open your web browser and try openning www.xyz.com , it will not load !

To unblock sites just do the opposite !

Identify motherboard fault

Hi friends,
Here i will share my knowledge I was working chip level repairing work
motherboard , all types of printers , ups ,monitor, scanner, etc.

Today i will share information about motherboard fault
Motherboard diagnostic card has very usefull .
if your board is not working insert card on pci slot or isa slot and
read error code . error code nearly by same all types of bios and it's usefull also
for motherboard repairing all error code contain in user manual book
and find problem very easy novice level engineer can also use it.

Trick To Create Table In Word !

To create a table in Ms Word you can use this shortcut !

>> Just type : +======+=====+====+===+==+=+

>> And simply hit 'Enter' !

>> You will see that the text changes to a table. Here, the number '=' represent the number of characters in each cell !

>> Just it makes your work easy and fast !

Google Search Tips !

You can make your search more efficient by learning some search basics !

Try these tips :
1. Use Of '+' sign :
This ensures that the results returned to you will definatly consist of the word following the '+' sign. For Eg :
Search: reviews of +iPhone and iPod
This will show results containing the word reviews or iPod but the results will definatly consist of iPhone !

2. Use Of '-' sign :
Using '-' sign before any word will ensure that the particular word will not be included in the results !

3. Use Of '~' sign :
Using '~' before any word will return the results also containing the synonyms of the word !

4. Search a particular site :
To search a particular website you can use the following syntax in the google search :
Search: site:www.xyz.com abc
For Eg :
Search: site:http://pcremix.blogspot.com/ Google Search Tips

5. Define a word :
To get the definition of a word just use :
Search: define:abc
For Eg : Search: define:Computer
This will return you results which define 'Computer'.

6. Find Pages similar to a page :
To find a page similar i.e. consisting of same type of content, use the following syntax :
Search: related:http://www.xyz.com/

7. Search for exact phrase :
To search a set of words exactly together i.e.
For Eg :
Search: "contact us"
This will return the results containing both contact and us together !

8. Using the wild card '*' :
The * sign can be used in places where the whole word is not known.
For Eg:
Search: friend*
This will return the results containing friend , friends , friendship.

9. Using the '?' sign :
This is used when the full spelling of the word is not known.
For Eg:
Search: fri??d
This will result that in the results in which any alphabet can take the place of '?' sign.

10. Use of boolean operators :
The boolean operators like AND,OR,NOT can be used in search box to connect the words !
The search engine understands them as what they mean but the must be in capital letters !
For Eg:
Search: swim OR float
This will return the results containing either swim or float !

Improve your internet speed

Windows uses 20% of your bandwidth

Windows uses 20% of your bandwidth. Here's how to Get it back

A nice little tweak for XP. Microsuft reserve 20% of your available bandwidth for their own purposes (suspect for updates and interrogating your machine etc..)

Here's how to get it back:

Click Start-->Run-->type "gpedit.msc" without the "

This opens the group policy editor. Then go to:


Local Computer Policy-->Computer Configuration-->Administrative Templates-->Network-->QOS Packet Scheduler-->Limit Reservable Bandwidth


Double click on Limit Reservable bandwidth. It will say it is not configured, but the truth is under the 'Explain' tab :

"By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default."

So the trick is to ENABLE reservable bandwidth, then set it to ZERO.

This will allow the system to reserve nothing, rather than the default 20%.


WISE WORDS:The better part of valour is discretion.

Boot Winindows XP Fast

Follow the following steps:

1. Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:\
2. From the Start menu, select "Run..." & type "gpedit.msc".
3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.
4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".
5. Click "OK", "Apply" & "OK" once again to exit.
6. From the Start menu, select "Run..." & type "devmgmt.msc".
7. Double click on "IDE ATA/ATAPI controllers"
8. Right click on "Primary IDE Channel" and select "Properties".
9. Select the "Advanced Settings" tab then on the device or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".
10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.
11. Reboot your computer.

 Lock any folder without using any software

1. Suppose you have a folder named abcd in D:\abcd.
2. In the same drive next to the folder create a new notepad file with the exact statementren abcd abcd.{21EC2020-3AEA-1069-A2DD-08002B30309D}
3. Now save this text file as loc.bat
4. Create another notepad file and typeren abcd.{21EC2020-3AEA-1069-A2DD-08002B30309D} abcd
5. Save this as key.bat
6. Now there are two batch files. Double click loc.bat and your folder will change into Control Panel and its contents cannot be viewed .
7. To open the folder double click key.bat and you get back your original folder.
8. For more safety keep the key.bat in another location . Only for unlocking copy paste to the original location and double click..

Speed up your Hard Disk

To speed up your hard disk speed we need to configure a special buffer in the computer's memory in order to enable it to better deal with interrupts made from the disk.

This tip is only recommended if you have 256MB RAM or higher.

Follow these steps:

Run SYSEDIT.EXE from the Run command.

Expand the system.ini file window.

Scroll down almost to the end of the file till you find a line called [386enh].

Press Enter to make one blank line, and in that line type

Irq14=4096



Note: This line IS CASE SENSITIVE!!!

Click on the File menu, then choose Save.

Close SYSEDIT and reboot your computer.

Done. Speed improvement will be noticed after the computer reboots.

Useful Symbols For MS Office !

These Symbols can be used in MS Word, Excel,etc.

For © : Alt+0169
For ® : Alt+0174
For ™ : Alt+0153
For › : Alt+0155
For † : Alt+0134
For ø : Alt+0248
For ¤ : Alt+0164
For « : Alt+0171
For ° : Alt+0176
For ± : Alt+0177
For ² : Alt+0178
For ³ : Alt+0179
For µ : Alt+0181
For ¶ : Alt+0182
For ¹ : Alt+0185
For » : Alt+0187
For ¼ : Alt+0188
For ½ : Alt+0189
For ¾ : Alt+0190
For Å : Alt+0197
For × : Alt+0215
For Ø : Alt+0216
For Þ : Alt+0222
For ß : Alt+0223
For ?: Alt+1